Power Tools

>

Pneumatic Tools

HEAT GUN HG5030K
In stock

1,600 W Heat Gun     Wide Variety of Accessories     2-temperature settings (350 and 500 °C) for a variety of applications     2-speed blower settings (300 and 500 L/min) for greater versatility     Delivers up to 500 L/min at 500 °C     Easy-to-operate slide switch     Ergonomic soft rubber grip design for comfortable operation     With overheat protection     Glass protection nozzle for drying putty while protecting glass     Reflector nozzle for bending a plastic welding rod     Wide-slot nozzle for PVC packing     Overlap welding nozzle (slot-top) for heating a hot sheat from the upper side     Solder sleeves reflector for heating the lower side of a sheet and for heating a heat shrink tube     Welding nozzle (round-top) for welding a plastic welding rod     Speed welding nozzle for welding a plastic welding rod speedily while holding it     Double insulated    

HEAT GUN HG6030K
In stock

1,800 W Heat Gun     Wide Variety of Accessories     2-temperature settings (300 and 600 °C) plus cooling mode (50 °C) for a variety of applications     Cooling mode for rapid cooling on nozzle change     2-speed blower settings (250 and 500 L/min) for greater versatility     Delivers up to 500 L/min at 600 °C     Easy-to-operate slide switch     Ergonomic soft rubber grip design for comfortable operation     With overheat protection     Glass protection nozzle for drying putty while protecting glass     Reflector nozzle for bending a plastic welding rod     Wide-slot nozzle for PVC packing     Overlap welding nozzle (slot-top) for heating a hot sheat from the upper side     Solder sleeves reflector for heating the lower side of a sheet and for heating a heat shrink tube     Welding nozzle (round-top) for welding a plastic welding rod     Speed welding nozzle for welding a plastic welding rod speedily while holding it     Double insulated    

HEAT GUN HG6530V
In stock

2,000 W Heat Gun     Wide Variety of Accessories     Durable and powerful heat gun with variable temperature control and LCD display     3-speed blower settings for greater versatility     Delivers up to 550 L/min at 650°C     Variable temperature control (push button switch: by every 10°C)     Easy-to-operate slide switch     Ergonomic soft rubber grip design for comfortable operation     Integrated rear stand supports gun in up position for operator convenience     Cooling mode (50°C) with software for rapid cooling on nozzle change     Overheat protection with thermostat and thermal fuse     Glass protection nozzle for drying putty while protecting glass     Reflector nozzle for bending a plastic welding rod     Wide-slot nozzle for PVC packing     Reduction nozzle for welding the sheet from the surface of the sheet     Overlap welding nozzle (slot top) for welding the sheet from the bottom of the sheet     Solder sleeves reflector for heating the lower side of a sheet and for heating a heat shrink tube     Welding nozzle (slot top) for welding the plastic rod     Speed welding nozzle for plastic welding rod     Double insulated    

PNEUMATIC BRAD NAILER AF506
In stock

18 Ga 50 mm (2″) Pneumatic Brad Nailer, Air Duster     Lightweight at Only 1.3 kg (2.9 lbs) for Increased Maneuverability     Air duster for sweeping up job site floor as well as workpieces     Compatible with EN ISO11148-13     Slim soft grip provides increased comfort     Drives a range of 18 gauge brad nails, from 15mm (5/8″) to 50mm (2″), into hard or soft wood applications; magazine capacity is up to 100 nails     Quick-release cam-lock opens nail guide assembly to easily clear jammed nails; efficient design minimizes downtime     Easy to use “tool-less” depth adjustment dial for a wide variety of finish applications     Clear window allows operator to see number of remaining staples     Easy-to-see slim nose tip allows quick and easy access to a desired fastening point     Nose adapter for preventing workpiece surface from being scratched or damaged     Non-marring rubber nose and bumpers protect the wood’s surface from being scratched or damaged     Tool hook is convenient for hanging the tool temporarily          

PNEUMATIC COIL NAILER AN613
In stock

65 mm (2-9/16″) Pneumatic Coil Nailer     Pneumatic coil nailer powered by normal pressure air and designed to comply with ISO and other standards     Built-in air duster helps clean dust and debris off floors and other surfaces     Further improved rapid fire function in contact actuation mode     Low noise & low recoil; The mechanisms of trigger valve and head valve have been redesigned from AN611 to reduce air leak and recoil, providing comfortable operation     “Tool-less” depth adjustment engineered for more precise flush and countersink nailing     Two operation modes: Single sequential actuation mode & Contact actuation mode     Single sequential actuation mode is featured to comply with ISO and other standards     Easy-loading canister with nail size adjustment provides maximum versatility     Multi-directional exhaust port directs exhaust air away from operator     Easy-to-grip handle; Anti-slip ribs added to the grip rubber provides more control     Extended hook depth adds stability to the nailer hung on the hook     Hook can be attached on either left or right side     Main application: Sub-floor framing, Exterior nailing, Interior nailing, Siding, Framing