Power Tools

305 mm (12″) 2,400 W SJS Angle Cutter with Soft Start 305 mm (12″) diamond wheel provides max cutting depth of 100 mm (4″) Soft start for smooth start-ups Smooth and comfortable cutting “SJS” technology prevents kickback if blade jams protecting both the operator and tool Guide wheels on the tool guard ensure smooth tool travel over surface material Rubber shield protects the operators hand and motor from debris Lock-on button for continuous operation Ball bearing construction for longer tool life Integrated nozzle can be connected to vacuum system for clean operation Double insulated

355 mm (14″) 2,400 W SJS Angle Cutter with Soft Start Soft start function minimizes the startup shock Faster cutting for increased productivity SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop Powerful 1,650 W motor delivers 3,500 RPM for the most demanding applications AC/DC switch for use with alternative power source Tool base can be removed for cutting closer to walls; guide wheels on the tool guard for smooth traveling Built-in vacuum attachment port for efficient removal of dust and debris Rubber shield helps keep debris away from operator and from entering the motor Tool base adjusts allowing up to 5″ cutting depth; best for cutting split face block when building retaining walls Guide wheels on the tool guard ensure smooth traveling of tool over surface material when base is removed for cutting closer to walls Positioning of the tool body can be adjusted (0°-80°) for operator comfort; operates independently of cutting depth for convenience and efficiency Base has front and rear cutting guides for increased accuracy Double insulated

12V max CXT Li-Ion Cordless 85 mm (3-3/8″) Cutter, Wet Type Slide style battery and improved ergonomic grip Ergonomically best possible barrel grip for easy handling Specifically designed for cutting glass and ceramic tile Powerful 1,600 RPM motor delivers fast and powerful cutting 85 mm blade delivers a maximum cutting depth of 25.5 mm for a wide range of cutting applications Compact and ergonomic design at only 313 mm long Lightweight for reduced operator fatigue Nickel-plated tilting base for bevel cuts from 0° to 45° Nickel-plated tilting base prevents staining and corrosion Adjustable cutting depth up to 25.5 mm at 90° and 16.5 mm at 45° Large water supply tank with easy open cap for wet cutting applications Soft grip provides increased comfort on the job On-tool hex wrench for fast and easy blade changes and keeping it from lost Lock-off safety lever prevents accidental start up Conveniently located shaft and lock for easy blade replacement Battery protection circuit protects against overloading, over-discharging and over-heating Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size Multi-contact terminals ensure stable contact with battery even under extreme vibration

12V max CXT Li-Ion Cordless Multi Cutter Large Work Amount on a Single Battery Charge High power satisfies even professional needs such as carpet contractors Cuts thin and thick material up to 6 mm such as cardboard, carpet, fabrics, leather, CD, DVD & Blu-ray Handy size for easy maneuverability in various applications for home and professional use Auto self-sharpening function maintains sharp performance Soft grip provides increased comfort on the job Lock-off button operable from either side prevents accidental start up Slide style battery and improved ergonomic grip Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size Multi-contact terminals ensure stable contact with battery even under extreme vibration Battery protection circuit protects against overloading, over-discharging and over-heating

Max Cutting Capacity: 88 mm 230 mm Diamond wheel ideal for cordless power cutter; New diamond wheel with even pattern placement of diamond grits; The grit arrangement provides sharp cutting edge constantly Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop LED job light enables operation in the dark sites where electricity is not supplied; can be turned on/off by pushing the button conveniently located on the top of the tool Battery cover protects battery from water in wet cutting Low vibration for increased operator convenience BL motor delivers 6,600 RPM BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor efficiently uses energy to match torque and RPM to the changing demands of the application Electric brake; having electric brake system that engine power cutters do not have; stops the cut-off wheel / diamond wheel in 2.0 / 4.0 seconds for maximum productivity Overload indicator lamp; alerts operator of overload with a red blinking LED; reduces unnecessary battery recharging by overload protection Lock-off button prevents accidental start up Soft start suppresses start-up reaction for smooth start-ups Water supply kit can be connected; The hose is designed to run inside the tool housing to prevent from being caught in objects eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions Battery protection circuit protects against overloading, over-discharging and over-heating

110 mm (4-3/8″) 1,300 W Cutter, Dry / Wet Type (country-specific) Powerful 1,300 W motor delivers 13,800 RPM Redesigned base with grooved back surface for smoother operation Compact and lightweight for less operator fatigue Compact blade case developed with the same design concept as 4100NH2 Easy alignment of base end with the cutting line on workpiece Water supply fixture can be mounted On-tool hex wrench for fast and easy blade changes and keeping it from lost Anti-slip dimples Specialized for right angle cutting only Flat motor housing allows tool to stand upright when changing blades Cuts up to 32 mm (1-1/4″) Can be used with wet or dry type wheels (country-specific) Easy to adjust depth gauge for precision cutting Large top handle design for increased comfort Lock-off button helps prevent accidental starts (for tool with lock-off button) Lock-on button for continuous use operation (for tool with lock-on button) Double insulated Externally accessible brushes for greater serviceability

110 mm (4-3/8″) 1,200 W Cutter, Dry / Wet Type (country-specific) High performance and durability at less expense Powerful 1,200 W motor delivers 13,800 RPM Cuts up to 32 mm (1-1/4″) Redesigned base with grooved back surface for smoother operation Compact design at only 231 mm (9-1/8″) long and weighs only 2.6 kg (5.7 lbs) for less operator fatigue Can be used with wet or dry type wheels (country-specific) Water supply tube holder allows for easy installation/removal of the tube Easy alignment of base end with the cutting line on workpiece Specialized for right angle cutting only Easy to adjust depth gauge for precision cutting Flat rear end is convenient for replacing the diamond wheel Large top handle design for increased comfort Lock-off button helps prevent accidental starts (For tool with Lock-off button) Lock-on button for continuous use operation (For tool with Lock-on button) On-tool hex wrench for fast and easy blade changes and keeping it from lost Externally accessible brushes for greater serviceability Double insulated

110 mm (4-3/8″) 1,200 W Cutter, Dry / Wet Type (country-specific) High performance and durability at less expense Ergonomically designed handle fits your hand perfectly to provide maximum comfort and control Powerful 1,200 W motor delivers 13,000 RPM Redesigned base with grooved back surface for smoother operation Compact and lightweight for less operator fatigue Easy alignment of base end with the cutting line on workpiece Water supply fixture can be mounted On-tool hex wrench for fast and easy blade changes and keeping it from lost Specialized for right angle cutting only Flat rear end is convenient for replacing the diamond wheel Cuts up to 32 mm (1-1/4″) Can be used with wet or dry type wheels (country-specific) Easy to adjust depth gauge for precision cutting Large top handle design for increased comfort Lock-off button helps prevent accidental starts (for tool with lock-off button) Lock-on button for continuous use operation (for tool with lock-on button) Screw and nut construction for high repairability Double insulated Externally accessible brushes for greater serviceability

125 mm (5″) 1,250 W Cutter, Dry / Wet Type (country-specific) High performance and durability at less expense Powerful 1,250 W motor delivers 12,000 RPM Cuts up to 40 mm (1-9/16″) Redesigned base with grooved back surface for smoother operation Newly designed blade case protects the depth guide from being deformed during operation Compatible with 110 mm (4-3/8″) Diamond cup wheel Compact and lightweight design for less operator fatigue Water supply tube holder allows for easy installation/removal of the tube (country-specific) Easy alignment of base end with the cutting line on workpiece Specialized for right angle cutting only Can be used with wet or dry type wheels (country-specific) Easy to adjust depth gauge for precision cutting Vent of motor housing is drip-resistant Flat rear end is convenient for replacing the diamond wheel Large top handle design for increased comfort Lock-off button helps prevent accidental starts (For tool with Lock-off button) Lock-on button for continuous use operation (For tool with Lock-on button) On-tool hex wrench for fast and easy blade changes and keeping it from lost Double insulated. Externally accessible brushes for greater serviceability

110 mm (4-3/8″) 1,200W Cutter, Dry / Wet Type More powerful cutting in stone masonry, tile and concrete Powerful motor, 1,650W in max. power output Dust proof construction Flat washers on both ends of armature O ring on spindle

125 mm (5″) 1,400 W Dustless Cutter, Dry Type 360° Rotatable Dust Collecting Port for Vacuum Cleaner / Dust Bag Connection Compatible with optional guide rail for increased maneuverability Dust cover to prevent dust scattering around Dust proof switch covered with dust cover prevents contamination of motor Powerful 1,400 W motor delivers 12,200 RPM Up to 125 mm (5″) diameter diamond wheel can be used Wide blade case enables use of curved diamond wheel Cuts up to 40 mm (1-9/16″) with 125 mm (5″) wheel Powerful cutting in stone, masonry, tile, concrete & more Flat motor housing allows tool to stand upright when changing blades Large top handle design for increased comfort Lock-on button for continuous use operation (for tool with lock-on button) Two-stage safety trigger switch prevents accidental start up (for tool with lock-off button) On-tool hex wrench for fast and easy blade changes and keeping it from lost Externally accessible brushes for greater serviceability Double insulated

Icon of ergonomic power cutter features enlarged air filter New air filter system prevents dust and dirt coming into the engine Cooling of engine improved by bigger air intake area Infinite adjustable cutting guide with grip Carburetor : Diaphragm type, Ignition : Electronic, Starter system : Recoil

355 mm (14″) 61 mL 2-Stroke Power Cutter 3.2 kW (4.4 HP) with powerful 61 mL engine at only 8.8 kg (19.4 lbs) Stratified Air Scavenging (SAS) recovers 75% of unburned fuel and reduces fuel consumption by 20% Cyclonic air intake delivers more air, more efficiently and increases air filter life by discarding 90% of larger debris Start capacitor with spring assisted recoil stores electrical energy resulting in significantly less pull start force Sliding front engine mounts help absorb vibration by detaching when cutting pressure is applied Smaller hub and drive wheel assembly increases maximum cutting depth to 130 mm (5-1/8″) Larger surface inverted intake and filter system extends filter life and service intervals Multi-ribbed, self tensioning belt is engineered to provide a more consistent transfer of power Lower noise at 97 dB(A) and smoother idle for continuous operation Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts On-Off choke operation switch on a single lever with touch-stop function for operator convenience Aluminum guard and wheel pressure plates to reduce overall weight Clear fuel tank window provides a convenient fuel level indicator Water pressure control knob for more accurate flow rate adjustments

355 mm (14″) 73 mL 2-Stroke Power Cutter High performance with powerful 5.1 HP/73 cc. Engine Improved decompression valve and metering spring for precise fuel regulation at start up Ignition coil with start-support function stores electrical energy with each pull for easier start ups On-Off-Choke operation switch on a single lever for operator convenience Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance Starter grip decompression valve for faster starting Improved ignition system with large flywheel and rare earth magnets create more efficient power Reinforced aluminum blade guard with 70 degrees range of limitless positioning using a marked knob handle Improved ignition system with larger flywheel and rare earth magnets for create more efficient power Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort Microchip controlled carburetor designed to compensate engine timing according to work load Aluminum guard and wheel pressure plates to reduce weight Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank 2-mass dampening system engineered to provide reduced vibration to operator

355 mm (14″) 75.6 mL MM4 Power Cutter The FIRST 4-Stroke Power Cutter Available On The Market Save The Cost Of The Power Cutter With Fuel Savings Alone Reduced noise and fuel consumption versus competitive 2-stroke models for maximum operator comfort and reduced operational costs No fuel mixing prevents damage due to improper fuel mixture and eliminates need to carry separate mixed fuel Cleaner 4-stroke emissions limits environmental impact and reduced carbon buildup in engine Automatic decompression valve reduces required start up force by 40% versus competitive 2-stroke models Pressure compensated carburetor prevents flooding by automatically adjusting to ensure the proper amount of fuel delivery Advanced five stage air filtration system provides cleaner air for maximum engine performance Designed for maximum performance and durability on heavy duty jobsites Reversible cutting arm enables cutting disc to be side or center mounted for optimal operational versatility in a variety of applications Angled fuel tank port enables quick and easy fueling when power cutter is in the upright position Integrated guide roller wheels enable fatigue free operation and increased precision during long distance horizontal cutting applications Low-vibration system with damper springs to absorb vibration from engine to integrated front and rear handles Casters for moving convenience

405 mm (16″) 81 mL 2-Stroke Power Cutter Capacity performance 405 mm (16″) power cutter with 5.6 HP/81 cc engine Improved decompression valve and metering spring for precise fuel regulation Start capacitor with start support function stores electrical energy resulting in significantly less pull start force On-Off-Choke operation switch on a single lever for operator convenience Five-stage, foam-paper-nylon system with advance direction air flow provides cleaner air for better saw performance SLR Muffler recycles unburned fuel vapor for reduced scavenging-losses and up to 15% improved fuel consumption Microchip controlled carburetor designed to compensate engine timing according to work load Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground 405 mm (16″) wheel capacity increases maximum cutting depth to 147 mm (5-3/4″) Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort Aluminum guard and wheel pressure plates to reduce weight 2-mass dampening system provide reduced vibration to operator Water supply kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank