Power Tools

>

Bush Cutter

PETROL BUSH CUTTER KY-BC52G
In stock

    Displacement     :52CC    

52CC GASOLINE BUSH CUTTER KYP-BC52HQ
In stock

    Displacement     :52CC     Engine Output Power     :1.45KW/7000RPM     Idling Speed     :2800RPM     Fuel Tank Capacity     :850Ml     Starting System     :Automatic Recoil Hand Starter    

CORDLESS GRASS TRIMMER DUR187L
In stock

18V LXT BL ADT Cordless Grass Trimmer, Loop Handle ADT (Automatic Torque Drive Technology) adjusts speed and torque during operation for optimum performance Lightweight and compact head for reduced operator fatigue Plastic triple blade for heavy duty operation Plastic triple blade with streamline and protrusion reduce air resistance and noise Easy plastic blade replacement only by removing cover BL motor located at trimmer head for improved balance and functionality with no loss of mechanical power BL motor delivers up to 6,000 RPM for faster cutting BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life BL motor with high power to weight and size ratio 4 Mode rotation selection: 3 stages + ADT mode Four-leaf clover-like cross section of nylon cord for lower noise Up to 168 min. of run time on a single charge using BL1860B under no load on the lowest setting with nylon cutting head (219 min. with plastic triple blade) Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions Reverse rotation system allows operator to quickly clear trimmer head of entangled grass and weeds Wire guard, foldable for convenience reduces the risk of damaging fences, flowers or ornaments Two stage safety trigger switch with electronic power on / off button Soft grip provides increased comfort on the job Battery protection circuit protects against overloading, over-discharging and over-heating. Shoulder belt for operator convenience. Constant speed control automatically applies additional power to the motor to maintain speed under load. Soft start feature for added motor protection. Easy-loading bump and feed trimmer head for increased user convenience. Nylon cords are automatically fed out by tapping the cutting head on the ground. Electric brake for maximum productivity and increased operator safety. Onboard hex wrench for fast and easy handle position changes and keeping it from lost. Low noise level suitable for use in residential areas and public spaces. Zero emissions and reduced maintenance; no need for gas or oil

CORDLESS GRASS TRIMMER DUR190L
In stock

18V LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Loop Handle Better maneuverability through lightweight and the same powerful cutting performance as the current DUR187U series One protector for metal blade / plastic blade / trimmer head Toolless shaft lock for plastic blade change The guard integrated with receive washer prevents weed winding Soft grip of ergonomic design; The same one as used on DUR368A series Comfortable band assembly with well-cushioned shoulder pad (DUR190U, DUR191U only); Increased cushion performance of the shoulder pad reduces operator fatigue Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop BL motor delivers up to 6,000 RPM for faster cutting BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low: 3,500 RPM, Medium: 5,100 RPM, High: 6,000 RPM) allows the operator to match speed to application XPT (eXtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh job site conditions Electric brake for maximum productivity and increased operator safety Soft start feature for added motor protection

CORDLESS GRASS TRIMMER DUR190U
In stock

18V LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Bike Handle Better maneuverability through lightweight and the same powerful cutting performance as the current DUR187U series One protector for metal blade / plastic blade / trimmer head Toolless shaft lock for plastic blade change The guard integrated with receive washer prevents weed winding Soft grip of ergonomic design; The same one as used on DUR368A series Comfortable band assembly with well-cushioned shoulder pad (DUR190U, DUR191U only); Increased cushion performance of the shoulder pad reduces operator fatigue Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop BL motor delivers up to 6,000 RPM for faster cutting BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low: 3,500 RPM, Medium: 5,100 RPM, High: 6,000 RPM) allows the operator to match speed to application XPT (eXtreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh job site conditions Electric brake for maximum productivity and increased operator safety Soft start feature for added motor protection

CORDLESS GRASS TRIMMER DUR368A
In stock

18V X2 (36V) LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Bike Handle Automatic Torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback Sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop Delivers up to 125 min. of run time under load on the low speed setting using two BL1860B batteries Makita-built Outer Rotor BL Brushless Motor direct-drive system provides high power and increased torque Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low: 3,500 RPM, Medium: 5,300 RPM, High: 6,500 RPM) allows the operator to match speed to application Direct-drive motor mounted directly on the trimmer head for increased efficiency and improved tool balance BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Compatible with Metal blades, Chip saw blades, Plastic blades and Nylon cutting heads (country-specific) 350 mm cutting width with nylon cutting head for user convenience Lightweight for reduced operator fatigue BL motor delivers up to 6,500 RPM for faster cutting Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions Reverse rotation system allows operator to quickly clear trimmer head / blade of entangled grass and weeds Electric brake for maximum productivity and increased operator safety 3-stage dual LED gauge indicates battery charge level Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection. Smaller guard for better visibility. Ergonomically designed off-set bike handle with soft grip for operators comfort. New nylon cord features more sharpness, about 10% less noise, and about 15% less power consumption. Nylon cords are automatically fed out by tapping the cutting head on the ground. Aluminum motor housing engineered for improved durability. Two stage safety trigger switch with electronic power on / off button. Multifunctional control panel for operating main / 3-speed control / reversing switches. On-tool hex wrench for fast and easy blade changes and keeping it from lost. Battery guard for enhanced battery protection. Low noise level suitable for use in residential areas and public spaces. Zero emissions and reduced maintenance; no need for gas or oil. Two 18V LXT Lithium-Ion batteries deliver the power and run time for gas powered demands without leaving the 18V LXT platform. Instant start-up; simply load two 18V LXT batteries and the grass trimmer is ready to use. The best choices for use in resorts, public places and residential areas

CORDLESS GRASS TRIMMER DUR368L
In stock

18V X2 (36V) LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Loop Handle Automatic Torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback Sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop Delivers up to 110 min. of run time under load on the low speed setting using two BL1860B batteries Makita-built Outer Rotor BL Brushless Motor direct-drive system provides high power and increased torque Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low: 3,500 RPM, Medium: 5,300 RPM, High: 6,500 RPM) allows the operator to match speed to application Direct-drive motor mounted directly on the trimmer head for increased efficiency and improved tool balance BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Compatible with Metal blades, Chip saw blades, Plastic blades and Nylon cutting heads (country-specific) 350 mm cutting width with nylon cutting head for user convenience Lightweight for reduced operator fatigue BL motor delivers up to 6,500 RPM for faster cutting Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions Reverse rotation system allows operator to quickly clear trimmer head / blade of entangled grass and weeds Electric brake for maximum productivity and increased operator safety 3-stage dual LED gauge indicates battery charge level Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection. Smaller guard for better visibility. Ergonomically designed loop handle with rubberized soft grip for operators comfort. New nylon cord features more sharpness, about 10% less noise, and about 15% less power consumption. Nylon cords are automatically fed out by tapping the cutting head on the ground. Aluminum motor housing engineered for improved durability. Two stage safety trigger switch with electronic power on / off button. Multifunctional control panel for operating main / 3-speed control / reversing switches. On-tool hex wrench for fast and easy blade changes and keeping it from lost. Battery guard for enhanced battery protection. Low noise level suitable for use in residential areas and public spaces. Zero emissions and reduced maintenance; no need for gas or oil. Two 18V LXT Lithium-Ion batteries deliver the power and run time for gas powered demands without leaving the 18V LXT platform. Instant start-up; simply load two 18V LXT batteries and the grass trimmer is ready to use. The best choices for use in resorts, public places and residential areas

CORDLESS GRASS TRIMMER DUR369A
In stock

18V X2 (36V) LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Bike Handle 1.0 kW max output power similar to 30 mL class engine grass trimmers Excellent ability to perform continuous cutting achieved by high cooling capacity that suppresses heat generation of the controller and motor 43 cm (17″) cutting width similar to 30 mL class engine grass trimmers Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop Rear end mounted motor makes the tool balance similar to engine grass trimmers Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low / Medium / High) allows the operator to match speed to application BL motor delivers up to 7,000 RPM for faster cutting BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Compatible with Metal blades, Chip saw blades, Plastic blades and Nylon cutting heads (country-specific) Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions Reverse rotation system allows operator to quickly clear trimmer head / blade of entangled grass and weeds Electric brake for maximum productivity and increased operator safety Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection Ergonomically designed off-set bike handle with soft grip for operators comfort

CORDLESS GRASS TRIMMER DUR369L
In stock

18V X2 (36V) LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Loop Handle 1.0 kW max output power similar to 30 mL class engine grass trimmers Excellent ability to perform continuous cutting achieved by high cooling capacity that suppresses heat generation of the controller and motor 43 cm cutting width with nylon cutting head for user convenience Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop Rear end mounted motor makes the tool balance similar to engine grass trimmers Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low / Medium / High) allows the operator to match speed to application BL motor delivers up to 7,000 RPM for faster cutting BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Compatible with Metal blades, Chip saw blades, Plastic blades and Nylon cutting heads (country-specific) Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions Reverse rotation system allows operator to quickly clear trimmer head / blade of entangled grass and weeds Electric brake for maximum productivity and increased operator safety Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection Ergonomically designed loop handle with rubberized soft grip for operators comfort

CORDLESS GRASS TRIMMER DUR369N
In stock

18V X2 (36V) LXT BL ADT AFT Cordless 3-Speed Grass Trimmer, Loop Handle 1.0 kW max output power similar to 30 mL class engine grass trimmers Excellent ability to perform continuous cutting achieved by high cooling capacity that suppresses heat generation of the controller and motor 43 cm cutting width with nylon cutting head for user convenience Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop Rear end mounted motor makes the tool balance similar to engine grass trimmers Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low / Medium / High) allows the operator to match speed to application BL motor delivers up to 7,000 RPM for faster cutting BL motor is electronically controlled to optimize battery energy use for longer run time per charge BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life Compatible with Plastic blades and Nylon cutting heads (country-specific) Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh job site conditions Reverse rotation system allows operator to quickly clear trimmer head / blade of entangled grass and weeds Electric brake for maximum productivity and increased operator safety Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection Ergonomically designed loop handle with rubberized soft grip for operators comfort

CORDLESS GRASS TRIMMER UR100D
In stock

12V max CXT Li-Ion Cordless Grass Trimmer Compact Size Ideal for Trimming and Precise Edging Well balanced design with fully adjustable features to suit any operator Delivers 10,000 RPM with nylon cutting head for faster cutting Up to 55 min. of run time on a single charge under no load using BL1041B and plastic blade eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions Telescoping shaft (84 to 119 cm) for optimum cutting position Soft start feature gradually increases speed to eliminate start up shock Battery is located under grip to ensure better overall balance and ease of use Not only nylon cutting head but also plastic blade are compatible A spare plastic blade can be stored on tool Fast and easy handle position changes Front grip is foldable for carrying on a small car and storing in a small space Shoulder belt for operator convenience Nylon cutting head / plastic blade rotating clockwise prevents grass clippings from flying towards user’s side Wire guard, foldable for convenience reduces the risk of damaging fences, flowers or ornaments and can be used as auxiliary guide for edging Lock-off button operable from both left and right sides prevents accidental startup Zero emissions and reduced maintenance; no need for gas or oil Low noise level suitable for use in residential areas and public spaces Battery protection circuit protects against overloading, over-discharging and over-heating. Slide style battery and improved ergonomic grip. Multi-contact terminals ensure stable contact with battery. Part of the expanding 12V max CXT series, combining performance with superior ergonomics in a compact size

CORDLESS GRASS TRIMMER UR101C
In stock

36V Li-Ion BL ADT AFT Battery Powered 3-Speed Grass Trimmer, Bike Handle 36V high power drive system with BL motor provides 1 kW max output power similar to 30 mL class engine grass trimmers Excellent ability to perform continuous cutting achieved by high cooling capacity that suppresses heat generation of the controller and motor 43 cm cutting width with nylon cutting head for user convenience 36V high power drive system using model PDC01 portable power pack; Up to four batteries can be carried on user’s back, enabling long continuous operation while providing more lightweight tool body Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop IPX4 level water resistant WetGuard; Excellent water-resistant performance Rear end mounted motor makes the tool balance similar to engine grass trimmers Tool-less quick fastening handle holder (UR101C only) Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low / Medium / High) allows the operator to match speed to application Reverse switch for easy removal of grass clippings from the cutting tool Electric brake for maximum productivity and increased operator safety Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection On-tool hex wrench for fast and easy blade changes and keeping it from lost Low noise level suitable for use in residential areas and public spaces Zero emissions and reduced maintenance; no need for gas or oil. The best choices for use in resorts, public places and residential areas

CORDLESS GRASS TRIMMER UR201C
In stock

36V Li-Ion BL ADT AFT Battery Powered 3-Speed Grass Trimmer, Loop Handle 36V high power drive system with BL motor provides 1 kW max output power similar to 30 mL class engine grass trimmers Excellent ability to perform continuous cutting achieved by high cooling capacity that suppresses heat generation of the controller and motor 43 cm cutting width with nylon cutting head for user convenience 36V high power drive system using model PDC01 portable power pack; Up to four batteries can be carried on user’s back, enabling long continuous operation while providing more lightweight tool body Automatic torque Drive Technology (ADT) adjusts speed and torque during operation for optimum performance Active Feedback sensing Technology (AFT) turns the motor off if blade rotation is suddenly forced to stop IPX4 level water resistant WetGuard; Excellent water-resistant performance Rear end mounted motor makes the tool balance similar to engine grass trimmers Tool-less quick fastening handle holder (UR101C only) Constant speed control minimizes reduction in rotation speed under load 3-speed options (Low / Medium / High) allows the operator to match speed to application Reverse switch for easy removal of grass clippings from the cutting tool Electric brake for maximum productivity and increased operator safety Battery protection circuit protects against overloading, over-discharging and over-heating Soft start feature for added motor protection On-tool hex wrench for fast and easy blade changes and keeping it from lost Low noise level suitable for use in residential areas and public spaces Zero emissions and reduced maintenance; no need for gas or oil. The best choices for use in resorts, public places and residential areas

CORDLESS MULTI FUNCTION POWER HEAD DUX60
In stock

18V X2 LXT BL AFT Cordless Multi Function Power Head High Power BL Motor Enables to Work under Heavy Load Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows High/Medium/Low 3-speed selection and variable speed control by trigger Multi-tool system consisting of power head and versatile optional attachments is ideal for a wide range of applications BL motor with high power to weight and size ratio BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge BL motor efficiently uses energy to match torque and RPM to the changing demands of the application Ergonomically designed new loop handle fits comfortably in user’s hand Variable speed control (high: 0 – 9,700, medium: 0 – 8,200, low: 0 – 5,700 RPM) allows the user to match speed to application Constant speed control maintains constant speed under load Soft start for smooth start-ups Electric brake for maximum productivity and increased operator safety eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions Lever style lock system for quick toolless installation and replacement of the attachments Reverse switch for easy removal of grass clippings from the cutting tool Two-stage safety trigger switch prevents accidental start up On-board blade wrench for convenience Shoulder harness for operator convenience. Handle and hanger position can be adjusted to obtain comfortable handling of the tool. Two 18V LXT Lithium-Ion batteries deliver the power and run time for gas powered demands without leaving the 18V LXT platform. Instant start-up; simply load two 18V LXT batteries and the blower is ready to use. Zero emissions and reduced maintenance; no need for gas or oil. The best choices for use in resorts, public places and residential areas. Battery protection circuit protects against overloading, over-discharging and over-heating

ELECTRIC GRASS TRIMMER UR3501
In stock

35 cm (13-3/4″) 1,000 W Electric Grass Trimmer, Bent Shaft, Loop Handle Cost-effective and lightweight Aluminum bent shaft Soft grip provides increased comfort on the job Soft start feature gradually increases speed to eliminate start up shock Double insulated

PETROL BRUSHCUTTER EM2500U
In stock

24.5 mL 2-Stroke Brushcutter, Bike Handle Ergonomic handle bar of asymmetrical design Waist cushion

PETROL BRUSHCUTTER EM3400U
In stock

34.0 mL 2-Stroke Brushcutter, Bike Handle 34.0 mL 2-stroke engine with 1.15kW of power in compliance with European exhaust emission regulation of EU stage 1 for emerging market Lightweight for reduced operator fatigue Durable enough for professional applications Waist cushion for added comfort in long continuous operation Ergoomic bike handle of off-set design; Designed so that the vertical center line of the handle bar stays aligned with that of user 28 mm Shaft pipe

PETROL BRUSHCUTTER RBC411U
In stock

40.2 mL 2-Stroke Brushcutter, Bike Handle Robust Makita brushcutter ideal for professional brush-cutting Powerful and reliable 40.2mL engine Perfect balance and a excellent weight-to-power ratio The rigid drive shaft, durable gear head and aluminum post ensure top-performance all day Solid state ignition system RBC411U : Carburetor : Float-type RBC413U : Carburetor : Diaphragm-type